Basket
(0)
Stain masking paint
Stain blocker
Reference : 470001
2 in 1 solution
- Stain fixer (water stains, rust, greasy residue, nicotine stains, tar or glue residue, and blocks their reappearance)
- Primer before painting
Stain masking paint
Properties of Stain-Masking Paint
- Excellent adhesion
- High resistance to scratches and impacts
- UV resistant, does not yellow over time
- Quick drying
- Satin matte stretched finish
- Dry to the touch: after 20 minutes
- Cured through: after 12 hours (indicative values depending on temperature, coated thickness, humidity)
- Can be applied to plaster, cement, wood, concrete, wallpaper, old paint, etc.
Composition of the Stain Masking paint
Blinder : acrylate copolymers
Solvents : blend of solvents
Propellant : dimethyl ether
470001
Data sheet
- Volume
- 500 ml
- Product type
- Maintenance product
- Application domain
- Preparion of the supports
- Application area
- Concrete, Plaster
- Packaging
- Box of 12 cans
Instructions for use
- The surface must be clean, dry and free of grease.
- Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface.
- Cover the surrounding areas. Spray at a distance of approximately 25 to 30 centimetres from the surface.
- Leave to dry for 30 minutes between coats if applying several thin layers.
CLP labelling with two pictograms.
Dangerous. Follow the precautions.
ACETONE
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
You might also like
2 in 1 solution
- Stain fixer (water stains, rust, greasy residue, nicotine stains, tar or glue residue, and blocks their reappearance)
- Primer before painting