Spack Spray
Polyurethane dispersion paint
Reference : 470011
Polyurethane dispersion based paint that creates a “roughcast” effect finish. Particularly useful to touch-up renders and renovation. Can be applied to a wide range of building surfaces: wood, cement, plastic.
Spack Spray
Properties of the Spack Spray
- Colour: matt white
- Density at 20°C: 1.2
- Rapid drying
- Repairs, restructures, recreates a roughcast effect
- Application surface concrete, platerboard, wood...
- Interior use
- Easy application
Specifications of the Spack Spray
Composition
Binders: polyurethane dispersion
Propellant: dimethyl ether
470011
Data sheet
- Volume
- 500 ml
- Product type
- Maintenance product
- Application domain
- Preparion of the supports
- Application area
- Concrete, Plaster
- Packaging
- Box of 12 cans
Specific References
- ean13
- 3598300018827
Instructions for use
The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. Apply at a temperature between 10°C and 25°C.
1. Shake can well before and during use for 1 or 2 min. Mask or cover adjacent surfaces.
2.Spray at a distance of approximately 25 to 30 centimetres from the surface SPRAY WITH A CONTINUOUS CIRCULAR MOTION. By varying the layer thickness and the spraying distance compared to the surface, it is possible to spray both fine as well as course textures. Spack Spray can be used for covering, but also for light smattering, just apply texture after the whole surface is painted over with wall paint. If several layers are required, it is recommended to leave a 10 minute Flash-off time between the layers.
3.After use, clean the valve turn aerosol upside down and press the nozzle for approximately 2 or 3 second.
CLP labelling with one pictogram.
Dangerous. Follow the precautions.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
You might also like
Polyurethane dispersion based paint that creates a “roughcast” effect finish. Particularly useful to touch-up renders and renovation. Can be applied to a wide range of building surfaces: wood, cement, plastic.