Basket
(0)
Heat Resistant Paint
Heat Resistant Paint
Reference : 424004
- Withstands heat up to 650°C
- Direct application to metal (healthy/lightly rusted support)
- Fast drying
Heat Resistant Paint
High performance coating for surfaces exposed to high temperatures up to 650°C. Ideal for renovating engines, pipes, steam pipes, exhaust pipes, fireplaces, barbecues, etc.
Properties of High Temperature Paint
- Excellent adhesion
- High resistance to gasoline and chemicals
- Heat resistance: Up to 650°C peak
- Dry without dust: after 5 to 10 minutes
- Dry to the touch: after 10 to 15 minutes
- Cured through: after 30 to 60 min (at 200 °C) (indicative values depending on temperature, coated thickness, humidity)
Composition of high temperature paint
Binder: silicone resin
Pigments: temperature resistant color
Propellant gas: Dimethyl ether
424004
Precautions for use
- Before applying the high temperature paint, make sure the surface is clean, dry and free of grease.
- Remove any remaining paint, varnish, rust and sand. When used outdoors, remove any moss or algae deposits.
- Cover the surrounding areas.
- Shake from time to time during use.
- Apply from a distance of approximately 25 to 30 centimeters.
- After drying, heat for 30 to 60 minutes at least 200°C to harden the paint layer.
CLP labelling with two pictograms.
Dangerous. Follow the precautions.
ACETONE
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
- Withstands heat up to 650°C
- Direct application to metal (healthy/lightly rusted support)
- Fast drying