Basket
(0)
AEROBITUME Bituminous spray
Bituminous spray
Reference : 143003
Bituminous spray as bonding primer. It optimises bituminous plant mix work by preparing the surface to be treated properly and improving its adhesion capability. The aerosols preclude the use of tools such as brushes and blades.
| Volume discounts | Box discount | You Save |
|---|---|---|
| 10 | €5.04 | €50.40 |
AEROBITUME Bituminous spray
AEROBITUME : THE EASY TO USE BITUMEN SPRAY
Can be used for
REPAIRING OR REPLACING ASPHALT SURFACES
Use as a tack coat before applying cold-lay asphalt for improved adhesion.
REPLACING CAST IRON MANHOLE COVERS
Rapid drying to provide a quick and effective finish when manhole covers need to be replaced.
Properties of the bituminous spray
- Easy to use.
- Good adhesion and fast-drying.
- Can even be used for small, difficult to reach areas.
- Aerosol cans, gross volume 800 ml, net volume 600 ml, in boxes of 12.
Specifications if the bitumen spray
Asphalt. Blend of aliphatic and aromatic hydrocarbons.
Propellant: specific blend of isobutane and propane.
143003
Data sheet
- Volume
- 600 ml
- Product type
- Marking complement
- Application domain
- Maintenance, Roads, earthworks, pipes, construction...
- Application area
- Concrete, Bitumens, Minerals, Woods, Metal, Plastic
- Packaging
- Box of 12 cans
Specific References
- ean13
- 3598300024347
Instruction for use
Use head down, apply 25 cm from the surface.
• BEFORE USE : Hold the aerosol in an upside-down position and shake vigorously to thoroughly mix the emulsion, continue even after you can clearly hear the ball bearings.
• AFTER USE : Purge head-up.
Application method
Preferably apply to clean, dry surfaces free from grease.
CLP labelling with three pictograms.
Dangerous. Follow the precautions.
EC 919-446-0 HYDROCARBURES C9-C12, N-ALCANES, ISOALCANES, CYCLIQUES, AROMATIQUES (2-25%)
EC 629-715-1 FATTY ACIDS, C18 UNSAT, REACTION PRODUCTS WITH DIETHYLENETRIAMINE
EC 629-765-4 FATTY ACIDS C18 UNSAT, REACTION PRODUCTS WITH TRIETHYLENETETRAMINE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H317 May cause an allergic skin reaction.
H336 May cause drowsiness or dizziness.
H372 Causes damage to organs through prolonged or repeated exposure .
H411 Toxic to aquatic life with long lasting effects.
EUH066 Repeated exposure may cause skin dryness or cracking.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents / container in accordance with national regulations.
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
You might also like
Bituminous spray as bonding primer. It optimises bituminous plant mix work by preparing the surface to be treated properly and improving its adhesion capability. The aerosols preclude the use of tools such as brushes and blades.