Stain masking paint
Paint specially designed to hide stains
Reference : 424014
- 2 in 1 solution: stain fixer + primer before painting
- Multidirectional spray for easy application on walls and ceilings
Stain masking paint
Fixes difficult-to-treat stains such as water stains, rust, greasy residue, nicotine stains, tar or glue residue, and blocks their reappearance. Can be applied to plaster, cement, wood, concrete, wallpaper, old paint, etc.
Properties of Stain-Masking Paint
- Excellent adhesion
- High resistance to scratches and impacts
- UV resistant, does not yellow over time
- Quick drying
- Satin matte stretched finish
- Dry to the touch: after 15 minutes
- Cured through: after 24 hours (indicative values depending on temperature, coated thickness, humidity)
424014
Data sheet
- Volume
- 400 ml
- Product type
- Maintenance product
- Application domain
- Maintenance
- Application area
- Woods, Synthetic
- Packaging
- Box of 6 cans
Instructions for use
- The surface must be clean, dry and free of grease.
- Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface.
- Cover the surrounding areas. Spray at a distance of approximately 25 to 30 centimetres from the surface.
- Leave to dry for 30 minutes between coats if applying several thin layers.
CLP labelling with two pictograms.
Dangerous. Follow the precautions.
ACETONE
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
- 2 in 1 solution: stain fixer + primer before painting
- Multidirectional spray for easy application on walls and ceilings