S MARK marking spray paint

S MARK : THE NON FLUORESCENT WORKSITE MARKING SPRAY PAINT
WITH BEST QUALITY/PRICE COMPROMISE

Properties of the S MARK non fluorescent worksite marker

• Can be used on many different types of surface (even wet): concrete, sand, gravel, asphalt, wood and grass.
• The safety cap is particularly robust (a full aerosol dropped from a height of 1.50 m remains intact).
• Rapid drying: approx 10 min.
• Marking duration of approximately 6 months depending on the conditions of application and the surface to which it is applied.
• Temperature range: -20°C to 50°C
• Range of 6 colours that complement the S Mark Fluo fluorescent colour range.

DANGEROUS. FOLLOW THE PRECAUTIONS.

Specifications of the S MARK spray marker

Composition

Binder: acrylic.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.

Application method

Manually or using our purpose-designed application equipment (see bellow).
BEFORE USE: shake vigorously head down.
AFTER USE: purge head up.

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.

DANGER

607-022-00-5 ETHYL ACETATE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.