Basket
(0)
PROMARKER marking spray paint
Non fluorescent marking spray paint [12 Months]
Reference : 141509
PROMARKER spray paint is a non fluorescent construction marking spray paint used for a range of marking/identification purposes as a complement to the Fluorescent markers: earthworks, pipework and construction, electrical installations. With an excellent covering power it can effectively hide other markings. Easy and safe to use, PROMARKER® is fitted with the patented Soppec «TP» safety spray cap.
PROMARKER marking spray paint
PROMARKER : THE IDEAL WORKSITE MARKER FOR CONSTRUCTION WORKERS
PROMARKER : THE IDEAL WORKSITE MARKER FOR CONSTRUCTION WORKERS
Properties of the PROMARKER marking spray paint
- Excellent adhesion on various surfaces: bitumes, grass, concrete, sand (for others surfaces test before use)
- Higly visible from afar
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact).
- Quick drying: 10 mn
- Use temperature range: -20 to 50°C
- Short marking duration including on damp surfaces, of up to 8 weeks depending on the surface, the conditions of application and UV exposure
- Product available in a large wide of colours
- Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12
Specifications of the PROMARKER non fluorescent spray marker
Composition
Binder: acrylic.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.
141509
Data sheet
- Volume
- 500 ml
- Marking time
- 12 months
- Product type
- Non fluorescent paint, Marking paint, Masking paint
- Application domain
- Roads, earthworks, pipes, construction..., Mapping, tracking, picketing
- Application area
- Gravels, Plastic, Metal, Woods, Minerals, Sands, Grass, Bitumens, Concrete
- Packaging
- Box of 12 cans
Specific References
- ean13
- 3598300011477
Instructions for use
- Before each use, shake the can well (even after hearing the beads clearly)
- To optimize the quality of the marking, we advise you to spray the paint at 10 - 15 cm from the surface / floor
- After use, place the aerosol in a "head up" position and purge for 2 seconds to clean the valve and the diffuser. This prevents the aerosol from clogging
- To facilitate your markings and limit bad postures and musculoskeletal disorders,
CLP labelling with two pictograms
Dangerous. Follow the precautions.
EC 927-241-2 HYDROCARBONS, C9-C10, N-ALKANES, ISOALKANES, CYCLICS, <2% AROMATICS
EUH208 Contains FATTY ACIDS, C-18, UNSATD. TRIMERS, COMPD. WITH 9-OCTADECEN-1-AMINE, (Z)-.
Contains FATTY ACIDS, TALL-OIL, COMPDS. WITH OLEYLAMINE. May produce an allergic reaction.
EUH211 Warning! Hazardous respirable droplets may be formed when sprayed.
Do not breathe spray or mist.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
Not to be used for any usage other than those specified.
Do not use in a confined space
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
The environment and health at the heart of our priorities
- The environment and health at the heart of our priorities
- Our products are free of CMR substances (carcinogens, mutagens, etc.) of categories 1A, 1B & 2 at a concentration above the regulatory threshold of 0.1%.
- They are formulated without Hexane and Methanol, Toluene and Xylene.
- Without heavy metals Lead (Pb), Cadmium (Cd), ...
- Without environmental hazard symbol H412 : "non toxic for aquatic organisms" and without long term harmful effects on the ecosystem.
- Our labels comply with the European regulation in force CE n° 1272/2008 and its adaptations. (CLP Regulation - Classification - Labelling - Packaging (EC n° 1272/2008).
You might also like
PROMARKER spray paint is a non fluorescent construction marking spray paint used for a range of marking/identification purposes as a complement to the Fluorescent markers: earthworks, pipework and construction, electrical installations. With an excellent covering power it can effectively hide other markings. Easy and safe to use, PROMARKER® is fitted with the patented Soppec «TP» safety spray cap.