S MARK marking spray paint
search
  • S MARK marking spray paint

S MARK marking spray paint

Non fluorescent worksite marking paint [6 months]

Reference : 141904

S Mark Non Fluo is used as a complement to S Mark Fluorescent marking spray paint for everyday marking and identification that require neither long distance high visibility nor a marking duration greater than six months. It is also perfectly adapted for covering previous marking in black. Also fitted with the Soppec “TP” safety cap, it is both reliable and easy to use.

S MARK marking spray paint

Color: Red
Volume: 500 ml
Sales unit: 1 box of 12
Quantity

Contact us

S MARK : THE NON FLUORESCENT WORKSITE MARKING SPRAY PAINT WITH BEST QUALITY/PRICE COMPROMISE

Properties of the S MARK non fluorescent worksite marker

  • Can be used on many different types of surface (even wet): concrete, sand, gravel, asphalt, wood and grass.
  • The safety cap is particularly robust (a full aerosol dropped from a height of 1.50 m remains intact).
  • Rapid drying: approx 10 min.
  • Marking duration of approximately 6 months depending on the conditions of application and the surface to which it is applied.
  • Temperature range: -20°C to 50°C
  • Range of 6 colours that complement the S Mark Fluo fluorescent colour range.

Specifications of the S MARK spray marker

Composition

Binder: acrylic.

Pigments: mineral and organic, free from heavy metals.

Solvents: complex blend free from chlorinated solvents and aromatic compounds.

Propellant: specific blend of isobutane and propane.

SOPPEC CONSTRUCTION

English Catalog

Download (5.55MB)

SOPPEC CONSTRUCTION

English Catalog

Download (5.55MB)

141904

Data sheet

Volume
500 ml
Marking time
6 months
Product type
Non fluorescent paint, Marking paint
Application domain
Mapping, tracking, picketing, Roads, earthworks, pipes, construction...
Application area
Concrete, Bitumens, Grass, Gravels, Sands, Minerals, Woods, Metal, Plastic
Packaging
Box of 12 cans

Specific References

ean13
3598300015581

Instruction for use

  • Before each use, shake the can well (even after hearing the beads clearly).
  • To optimize the quality of the marking, we advise you to spray the paint at 10 - 15 cm from the surface / floor.
  • After use, place the aerosol in a "head up" position and purge for 2 seconds to clean the valve and the diffuser. This prevents the aerosol from clogging.
  • To facilitate your markings and limit bad postures and musculoskeletal disorders, use marking accessories.

CLP labelling with two pictograms

Dangerous. Follow the precautions.

607-022-00-5 ETHYL ACETATE

EUH208 Contains FATTY ACIDS, C-18, UNSATD. TRIMERS, COMPD. WITH 9-OCTADECEN-1-AMINE, (Z)-.

Contains FATTY ACIDS, TALL-OIL, COMPDS. WITH OLEYLAMINE. May produce an allergic reaction.

EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.

H222 Extremely flammable aerosol.

H229 Pressurised container: May burst if heated.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

P102 Keep out of reach of children.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

P211 Do not spray on an open flame or other ignition source.

P251 Do not pierce or burn, even after use.

P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

Do not use in a confined space.

Not to be used for any usage other than those specified.

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.

The environment and health at the heart of our priorities

  • The environment and health at the heart of our priorities
  • Our products are free of CMR substances (carcinogens, mutagens, etc.) of categories 1A, 1B & 2 at a concentration above the regulatory threshold of 0.1%.
  • They are formulated without Hexane and Methanol, Toluene and Xylene.
  • Without heavy metals Lead (Pb), Cadmium (Cd), ...
  • Without environmental hazard symbol H412 : "non toxic for aquatic organisms" and without long term harmful effects on the ecosystem.
  • Our labels comply with the European regulation in force CE n° 1272/2008 and its adaptations. (CLP Regulation - Classification - Labelling - Packaging (EC n° 1272/2008).