S MARK
search
  • S MARK
  • S MARK
  • S MARK
  • S MARK
  • S MARK

S MARK fluorescent marking spray paint

Fluorescent worksite marking paint [6 months]

Reference : 141916

S MARK is a fluorescent marking spray (6 months duration) used for all general marking works in various fields: earthworks, pipework and construction, roads maintenance, buried networks. Easy and safe to use, S MARK is now fitted with the patented Soppec «TP» safety spray cap.

S MARK fluorescent marking spray paint

Color: Orange
Volume: 500 ml
Sales unit: 1 box of 12
Quantity

Contact us

S MARK : THE FLUORESCENT MARKING SPRAY PAINT WITH BEST QUALITY/PRICE COMPROMISE

 

 

Properties of the S MARK fluorescent worksite marker

  • Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
  • A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
  • Rapid drying: approximately 10 min
  • Good autonomy and coverage ability: 1 aerosol is sufficient to durably mark an 55m line (2cm wide) using the Soppec marking stick
  • Good marking duration including on damp surfaces, of up to 6 months (dependent on the surface, the conditions of application and UV exposure)
  • Temperature range: -20°C to 50°C
  • S MARK is available in a wide range of colours.
  • Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

 

Specifications of the S MARK spray marker

Composition

Binder: acrylic.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.

SOPPEC CONSTRUCTION

English Catalog

Download (5.55MB)

141916

Data sheet

Volume
500 ml
Marking time
6 months
Product type
Marking paint, Fluorescent paint
Application domain
Mapping, tracking, picketing, Roads, earthworks, pipes, construction...
Application area
Plastic, Metal, Woods, Minerals, Sands, Gravels, Grass, Bitumens, Concrete
Packaging
Box of 12 cans

Specific References

ean13
3598300009801

Instructions for use

  • Before each use, shake the can well (even after hearing the beads clearly) 
  • To optimize the quality of the marking, we advise you to spray the paint at 10 - 15 cm from the surface / floor
  • After use, place the aerosol in a "head up" position and purge for 2 seconds to clean the valve and the diffuser. This prevents the aerosol from clogging
  • To facilitate your markings and limit bad postures and musculoskeletal disorders, use marking accessories

CLP labelling with two pictograms.

Dangerous. Follow the precautions.

607-022-00-5 ETHYL ACETATE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.

picto inflammablepicto dangereux

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.

 

The environment and health at the heart of our priorities

  • The environment and health at the heart of our priorities
  • Our products are free of CMR substances (carcinogens, mutagens, etc.) of categories 1A, 1B & 2 at a concentration above the regulatory threshold of 0.1%.
  • They are formulated without Hexane and Methanol, Toluene and Xylene.
  • Without heavy metals Lead (Pb), Cadmium (Cd), ...
  • Without environmental hazard symbol n° 412 : "non toxic for aquatic organisms" and without long term harmful effects on the ecosystem.
  • Our labels comply with the European regulation in force CE n° 1272/2008 and its adaptations. (CLP Regulation - Classification - Labelling - Packaging (EC n° 1272/2008).