Basket
(0)
PTFE dry lubricant
Dry PTFE spray
Reference : 980037
A high quality PTFE dry lubricant for mechanical components in metal or synthetic materials that need protection against oil and grease residues. The product forms a dry anti-static film that is virtually invisible, eliminating problems caused by friction on start-up and due to slipping.It is resistant to weather, acids and soft alkalis; it is water-repellent and pH neutral.
PTFE dry lubricant
Our dry PTFE spray offers a very low friction coefficient, an almost smooth texture, with particles of approximately 5 micrometres, together with very good adhesion. It therefore reduces wear and seizure for machine and equipment parts, conveyor belts, guide rails, machinery/agricultural parts.
Specifications of the PTFE dry lubricant
- Packaging: 500 ml
- Composition: PTFE dispersion, polymers in alcoholic solvents
- Appearance: clear, slightly cloudy liquid
- Propellant: propane-butane
- VOC-EU g/l: 598 g/l
- Relative density (20°C g/ml): 0.604
- Vapour pressure at 20°C: 4 - 5 bar
- Spray flow: 1.1 g/sec
- Particle size: 3.7 μm
- Drying time: approximately 5 minutes
- Withstands temperatures: -180°C to +260°C
980037
Data sheet
- Volume
- 500 ml
- Product type
- Lubricant, Technical product
- Application domain
- Maintenance
- Application area
- Metal, Plastic
- Packaging
- Box of 12 cans
Specific References
- ean13
- 3598300019008
Instructions of use of the PTFE dry lubricant
- Shake well the PTFE dry lubricant before using and apply a thin layer of Dry PTFE.
- A dry PTFE film is formed following evaporation of the solvent (approximately 5 minutes).
CLP labelling with two pictograms.
Dangerous. Follow the precautions.
PROPAN-2-OL
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
You might also like
A high quality PTFE dry lubricant for mechanical components in metal or synthetic materials that need protection against oil and grease residues. The product forms a dry anti-static film that is virtually invisible, eliminating problems caused by friction on start-up and due to slipping.It is resistant to weather, acids and soft alkalis; it is water-repellent and pH neutral.