PTFE lubricant

PTFE spray

A high quality PTFE lubricant that ensures good lubrication over a long period. Unblocks seized metal or plastic parts; has low friction resistance and is moisture-repellent thus protecting against corrosion. It offers good penetration and good resistance to high pressure.

More details

See full product description

72,00 €

  • 1 box of 12

Data sheet

PackagingBox of 12 cans
Volume400 ml
Product typeLubricant, Technical product
Application domainMaintenance
Application areaPlastic, Metal, ...


More info

This PTFE lubricant can be used for any parts with a rolling or sliding movement whether in a dry or damp environment : cogwheels, gearing, hinges, machine tools, etc.


Specifications of the PTFE lubricant


  • Packaging: 500 ml
  • Composition: blend of aliphatic hydrocarbons and alcohols
  • Appearance: clear liquid
  • Propellant: CO2
  • VOC - CH%: 96%
  • VOC-EU g/l: 725 g/l
  • Relative density (20°C g/ml): 0.758
  • Vapour pressure at 20°C: 5.0 - 5.5 bar
  • Spray flow: +/-3.5 g/sec




Health and safety

Safety data sheets are available free of charge on the internet:
CLP labelling with two pictograms.


H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H412 Harmful to aquatic life with long lasting effects.

picto inflammablepicto dangereux


Instructions of use of the PTFE lubricant


Shake the PTFE spray before use and apply a thin layer of PTFE. Best lubrication is obtained after evaporation of the solvent (approximately one minute).

  • Avis

  • Associated products