Basket
(0)
Plastic Primer
To help adhesion to plastics and smooth surfaces
Reference : 424009
- White tinted primer
- Good adhesion on very smooth surfaces
Plastic Primer
Primer Properties
- Excellent adhesion on smooth surfaces
- Dry without dust: after 10 to 15 minutes
- Dry to the touch after 15 to 25 minutes
- Recoatable after 12 hours (indicative values depending on temperature, coated thickness, humidity)
Composition of the Primer
Binder: acrylic
Solvent: Mixture of solvents
Propellant gas: Dimethyl ether
424009
Data sheet
- Volume
- 400 ml
- Product type
- Adhesion primer
- Application domain
- Maintenance, Preparion of the supports
- Application area
- Plastic
- Packaging
- Box of 6 cans
Instructions for use
- Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
- The surface must be clean, dry and free of grease.
- Remove all residues of varnish, rust, etc, then sand.
- When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas.
- Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
- Leave to dry for approximately 20 minutes between coats.
CLP labelling with two pictograms.
Dangerous. Follow the precautions.
ACETONE
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
- White tinted primer
- Good adhesion on very smooth surfaces