Galva Alu Gloss

Cold Galvanizing Paint

Reference : 424000

2 in 1 solution: anti-corrosion protective primer + finishing coat
Excellent shine
Heat resistance up to 250°C

Galva Alu Gloss

€101.93

VAT included

RAL color: Aluminium

Aluminium

Volume: 400 ml

400 ml

Quantity

Description Galva Alu Gloss

GALVA ALU GLOSS restores the shine of galvanized steel to make it look like new.

It is ideal for coating damaged zinc plating and for protecting or filling welds or holes on fences, metal structures, car body parts, etc.

GALVA ALU GLOSS can be used on steel and galvanized metal surfaces.

Properties of Bright Galva Aluminum

Very good adhesion providing excellent support for paint
Resistant to chemical products
Long-lasting electrochemical protection
Heat resistance: Up to 250°C
Recoatable after 24 hours (indicative values depending on temperature, coated thickness, humidity)

Composition of shiny Galva Alu

Binder: epoxy-ester
Pigments: high purity zinc
Propellant gas: Dimethyl ether

Attachments

Product Details Galva Alu Gloss

Reference 424000

Data sheet

Volume: 400 ml
Product type: Galva paint
Application domain: Maintenance
Application area: Metal
Packaging: Box of 6 cans

Specific References

ean13: 3598300026938

Our advices

Precautions for use

Shake well before use.
Remove paint and rust residues with a wire brush or a sander.
Surface must be clean, dry and free of grease.
When using outdoors, remove any moss or algae deposits.
Cover surrounding areas.
Spray from a distance of 25 cm from the surface.
Apply several thin layers.
Between the various layers, respect a time of drying of approximately 20mn

Regulations, health and safety

CLP labelling with three pictograms

Dangerous. Follow the precautions.

ACETONE
N-BUTYL ACETATE
SOLVANT NAPHTA AROMATIQUE LEGER (PETROLE)
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.