Galva Zinc Matt 97% Spray Paint
Cold Galvanizing Paint
Reference : 424001
- Formula with 97% pure zinc particles
- Ultra high performance against corrosion
- Protects welds
- Resists up to 350° C
Galva Zinc Matt 97% Spray Paint
Strongly concentrated out of zinc particles, GALVA ZINC MATT 97% helps to sustainably prevent corrosion on bare or galvanized steel surfaces, by forming an ultra-resistant self-protecting primer layer, ideal for the treatment of pipes, pipelines and pipelines, etc. GALVA ZINC MATT 97% has very good electrical conductivity allowing spot welding operations.
Properties of Galva zinc matt 97%
- Very good adhesion providing excellent support for paint
- Chemical resistant
- Long-lasting electrochemical protection
- Heat resistance: up to 350°C
- Dust-free drying: after 10 to 15 minutes
- Touch dry: after 20 to 30 minutes
- Recoverable after 24 hours (indicative values depending on temperature, coated thickness, humidity)
Composition of Galva zinc matt 97%
- Binder: epoxy-ester
- Pigments: high purity zinc
- Propellant gas: Dimethyl ether
Data sheet
- Volume
- 400 ml
- Product type
- Galva paint
- Application domain
- Maintenance
- Application area
- Metal
- Packaging
- Box of 6 cans
Specific References
- ean13
- 3598300026945
Precautions for use
- Shake well before use.
- Remove paint and rust residues with a wire brush or a sander.
- Surface must be clean, dry and free of grease.
- When using outdoors, remove any moss or algae deposits.
- Cover surrounding areas.
- Spray from a distance of 25 cm from the surface.
- Apply several thin layers.
- Between the various layers, respect a time of drying of approximately 20mn
CLP labelling with three pictograms
Dangerous. Follow the precautions.
ACETONE
N-BUTYL ACETATE
SOLVANT NAPHTA AROMATIQUE LEGER (PETROLE)
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.