Basket
(0)
TEMPO TP temporary marking spray paint
Fluorescent temporary spray marker [2-8 Weeks]
Reference : 141618
TEMPO TP is a temporary marking paint that is used for short term marking (2-8 weeks). This Chalk-based product is erasable under mechanically means (water spray, low pressure cleaner, brushes…). This easily allows its use on classified or protected areas, for urban environment, for landscaping plan. Easy and safe to use, TEMPO TP is fitted with the patented Soppec «TP» safety spray cap.
| Volume discounts | Box discount | You Save |
|---|---|---|
| 10 | €11.52 | €115.20 |
TEMPO TP temporary marking spray paint
TEMPO TP : THE IDEAL MARKING SPRAY PAINT
FOR FLUORESCENT AND TEMPORARY MARKINGS
Properties of the TEMPO TP temporary marking paint
- Excellent adhesion on various surfaces: bitumes, grass, concrete, sand (for others surfaces test before use)
- Higly visible from afar
- A particularly robust safety cap (a full aerosol dropped from a height of 1.50m will remain intact).
- Quick drying: 10 mn
- Use temperature range: -20 to 50°C
- Short marking duration including on damp surfaces, of up to 8 weeks depending on the surface, the conditions of application and UV exposure
- Product available in a large wide of colours
- Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12
Specifications of the TEMPO TP temporary spray marker
Composition
Binder: complex blend of mineral oils and clays.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.
141618
Data sheet
- Volume
- 500 ml
- Marking time
- 2 months
- Product type
- Fluorescent paint, Marking paint
- Application domain
- Mapping, tracking, picketing, Roads, earthworks, pipes, construction...
- Application area
- Concrete, Bitumens, Grass, Gravels, Sands, Minerals, Woods, Metal, Plastic
- Packaging
- Box of 12 cans
Specific References
- ean13
- 3598300005810
Instructions for use
· Before each use, shake the can well (even after hearing the beads clearly)
· To optimize the quality of the marking, we advise you to spray the paint at 10 - 15 cm from the surface / floor
· After use, place the aerosol in a "head up" position and purge for 2 seconds to clean the valve and the diffuser. This prevents the aerosol from clogging
· To facilitate your markings and limit bad postures and musculoskeletal disorders, use a marking accessories
CLP labelling with two pictograms.
Dangerous. Follow the precautions.
607-022-00-5 ETHYL ACETATE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
The environment and health at the heart of our priorities
- The environment and health at the heart of our priorities
- Our products are free of CMR substances (carcinogens, mutagens, etc.) of categories 1A, 1B & 2 at a concentration above the regulatory threshold of 0.1%.
- They are formulated without Hexane and Methanol, Toluene and Xylene.
- Without heavy metals Lead (Pb), Cadmium (Cd), ...
- Without environmental hazard symbol n° 412 : "non toxic for aquatic organisms" and without long term harmful effects on the ecosystem.
- Our labels comply with the European regulation in force CE n° 1272/2008 and its adaptations. (CLP Regulation - Classification - Labelling - Packaging (EC n° 1272/2008).
You might also like
TEMPO TP is a temporary marking paint that is used for short term marking (2-8 weeks). This Chalk-based product is erasable under mechanically means (water spray, low pressure cleaner, brushes…). This easily allows its use on classified or protected areas, for urban environment, for landscaping plan. Easy and safe to use, TEMPO TP is fitted with the patented Soppec «TP» safety spray cap.