PROTECT LINE marking protective varnish

Properties of the PROTECT LINE marking protective varnish

• High dry-extract level (33% +/-2%)
• Appearance: milky white becoming transparent when dry
• Finish: satin
• Quantity required: 15 a 50 m²/l depending on the application surface and dilution
• Drying: 2 to 4 hours
• Time before the surface can be used (traffic-ready): 24 to 48 hours
• Application temperature: +5°C to +30°C
• Density: 1.05

DANGEROUS. FOLLOW THE PRECAUTIONS.

Specifications of the PROTECT LINE marking protective varnish 

Composition

Aqueous dispersion of metallic acrylic resins mixed with a wax emulsion.
White, odourless liquid that can be diluted with water forming a transparent satin-finish coat once dry.

Application method

Manually or using our application equipment (paint roller…)
Drying Time: 15 to 20 min

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.

EUH208 Contains 1,2-BENZISOTHIAZOL-3(2H)-ONE. May produce an allergic reaction.
EUH208 Contains MIXTURE OF: 5-CHLORO-2-METHYL-4-ISOTHIAZOLIN-3-ONE [EC NO. 247-500-7] AND 2-METHYL-HISOTHIAZOL-3-ONE [EC NO. 220-239-6] (3:1). May produce an allergic reaction.
EUH210 Safety data sheet available on request.

Recommendation for use

• Easy to use, containing only one component, it requires neither special training nor any sophisticated application equipment.
• Dilution: can be used neat or diluted with water (between 5% and 15%) according to requirements.
• Sensitive to frost.
• The unused product should be stored at a temperature between 5°C and 25°C in a dry, wellventilated area.
• Store in a frost-free place, can be kept for 18 months in the original, unopened packaging.
• Keep all packaging tightly closed, carefully close after opening and keep upright.
• Keep away from sources of ignition, heat and sunlight.