The TRACING PLUS paint is intended more for marking lines on high-wear surfaces, for example inside factories and logistical warehouses due to its tremendous resistance to grime. This line marking spray paint is packaged in 750 ml containers for lasting, economical marking, particularly inside...
This product is no longer in stock
|Quantity (by box unit)||Discount||You Save|
|10||9,90 €||Up to 99,00 €|
|Packaging||Box of 6 cans|
|Product type||Line marking spray paint|
|Application domain||Line marking, Ground signage, Signalling and events|
|Application area||Concrete, Bitumens, Metal, ...|
DANGEROUS. FOLLOW THE PRECAUTIONS.
|Line width 4 cm to 10 cm||1 x 750 ml aerosol|
|1 coat||2 coats|
|Slow application||100 m||50 m|
|Rapid application||150 m||75 m|
NSF Certification :
Tracing Plus products can be used in premises where food products are stored or manufactured.
Binder: acrylic and alkyd urethane blend
Pigments: mineral and organic, free from lead and cadmium
Solvents: a complex blend free from chlorinated solvents and aromatic compounds (toluene, xylene, etc)
Propellant: dimethyl ether
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
Contains FATTY ACIDS, C18,UNSATD., DIMERS,REACTION PRODUCTS WITH N,N-DIMETHYL-1,3-PROPANEDIAMINE AND 1,3-PROPANEDIAMINE. May produce an allergic reaction.
Whatever the nature of the surface, the following conditions are essential for the optimal application of TRACING® PLUS :
Correct preparation of the surface to be painted is imperative to obtain excellent paint adhesion.
Thoroughly clean the surface to ensure that it is free from dust, dirt, grease, etc.
Relative humidity should be between 10% and 50%.
The application temperature should not be below 5°C.
For a good quality line, the first coat should be applied quickly (print layer); on the other hand the second and optional third coats should be applied more slowly to obtain the desired coverage.
Before applying TRACING PLUS® to a new concrete surface, allow a minimum of 3 to 4 weeks for complete drying (French building trades standards) and the elimination of acidity.
It is advisable to wait at least 15 days before line-marking a new asphalt surface in order to avoid any alteration to the quality of the marking.
n this domain, there are several different types of paint and the paint used for the floor may be incompatible with TRACING® PLUS (resulting in poor adhesion). We therefore recommend carrying out a test beforehand for these specific types of surface.
Lines can be given a protective coating of our PROTECT LINE varnish for improved longevity and dirt resistance.
Aucun article du blog en relation