Galva Zinc Matt Quick Drying Spray Paint
Cold Galvanizing Paint
Reference : 470204
A rapid-drying, cold galvanising paint that can be used to provide corrosionprotection for metals, steel and iron, for quick maintenance during construction or industrial production.
Galva Zinc Matt Quick Drying Spray Paint
Properties of the Galva Zinc Matt Quick Drying
- Heat resistant up to 250°C
- Dust dry after 5 to 10 minutes
- Touch dry after 10 to 20 minutes
- Leave to dry for 4 hours between coats
(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
Specifications of the Galva Zinc Matt Quick Drying
Composition
Binder: acrylate
Pigments: zinc with a high degree of purity
Propellant: dimethyl ether
Precautions for use
- Shake well before use.
- Remove paint and rust residues with a wire brush or a sander.
- Surface must be clean, dry and free of grease.
- When using outdoors, remove any moss or algae deposits.
- Cover surrounding areas.
- Spray from a distance of 25 cm from the surface.
- Apply several thin layers.
- Between the various layers, respect a time of drying of approximately 20mn
CLP labelling with two pictograms.
Dangerous. Follow the precaution
ACETONE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H410 Very toxic to aquatic life with long lasting effects.
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
You might also like