Décapant peinture
  • Décapant peinture

Paint stripper spray

Paint remover

Reference : 960012

The Soppec PRO TECH Stripper acts rapidly and intensely for a powerful effect. Ideal to remove alkyd resin-based paint or aqueous phase epoxy and polyurethane coatings, even if bicomponent, etc. Can be applied to almost all surfaces.

See product's full description

Paint stripper spray

VAT included
Volume: 500 ml
Unité de vente: 1 box of 12

Contact us

Specifications of the Paint stripper spray

  • Packaging: 500 ml
  • Composition: blend of solvents and paraffin wax, free from methylene chloride
  • Propellant: DME
  • VOC-EU g/l: 794 g/l
  • Relative density (20°C g/ml): 0.794
  • Vapour pressure at 20°C: 3.3 - 3.9 bar
  • Spray flow: 2.5 g/sec
  • pH: neutral
  • Usage/ dosage: 2-3 m2/kg, depending on usage


English Catalog

Download (3.43MB)


Data sheet

500 ml
Product type
Technical product
Application domain
Maintenance, Surfaces cleaning
Application area
Plastic, Metal, Woods, Bitumens, Concrete
Box of 12 cans

Specific References


Instructions of use of the Paint stripper spray

  • Do not use the paint stripper spray at temperatures below 5°C.
  • The surface should not include any frozen areas.
  • Under low temperatures, the product has a slower action.
  • Protect adjacent areas by covering.
  • Apply a sufficiently thick layer of the paint stripper to the surface to be treated and leave to act for at least 15 minutes.
  • Adjust the action time as necessary to eliminate bicomponent coatings.
  • Brush or clean the sprayer with warm water using appropriate pressure.
  • Remove any dissolved paint residues with a scraper or spatula. Repeat the treatment as necessary.
  • Rinse with water.

CLP labelling with one pictogram.

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

picto inflammable

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.